EFFECT OF FORMULATION AND PROCESS VARIABLES ON DEGRADATION PRODUCTS OF LOVASTATIN IN TABLET DOSAGE FORM

Authors

  • Najam-us-Saquib
  • Dilnawaz Sheikh
  • Iqbal Ahmed
  • Khan Usmanghani
  • Saif-ur-rehman Khattak Faculty of Pharmacy, Hamdard University, Shahra-e-Madinat Al-Hikmah, Muhammad Bin Qasim Avenue, Karachi-74600, Pakistan.

Abstract

Objective: Quantification of degradation products in drug substances and products is the most challenging tasks in pharmaceutical industries
nowadays. Systematic study on the degradation products of lovastatin in compressed tablets has not been reported in the literature. The objective
of the present study is to investigate the effect of excipients and method of manufacturing on the degradation products of lovastatin in compressed
tablets manufactured by three different methods. The study also aims to evaluate the impact of aging and packaging material on the degradation
products.
Methods: Tablets of lovastatin were prepared by wet granulation, dry granulation and direct compression methods with different excipients. The
tablets were assayed by a validated HPLC method for lovastatin and its major degradation products initially and after 12 months period while storing
at 25±°C in glass bottles, Polyvinyl chloride/Aluminum foil blisters and Alu/Alu blisters.
Results: Results have shown that excipients and method of manufacturing influence the amounts of major degradation products hydroxyacid
lovastatin (HAL) and dehydrolovastatin (DHL) which were found in amounts of 0.67% and 0.45% in tablets compressed via wet-granulation, 0.42%
and 0.19% in tablet compressed via dry-granulation and 0.30% and 0.20% in tablets compressed via direct compression method respectively. The
tablets showed maximum stability in Alu/Alu packing followed by packing in glass bottles and PVC/Al. foil blisters, respectively.
Conclusion: This study concluded that lovastatin obtained from different sources have different degradation products showing that they are originated
from the manufacturing stage of the API. The varying contents of the degradation products in tablets manufactured by different methods initially and
with time indicate that the manufacturing process and excipients also have important role in generation of degradation products. Furthermore,
packaging material significantly affect the stability of the tablets during storage. Therefore, all these conditions and factors must be considered and
controlled during formulation, manufacturing, and storage of the compound and its formulated products.
Keywords: Lovastatin, Degradation products, Hydroxy acid lovastatin and dehydro lovastatin.

Downloads

Download data is not yet available.

Author Biography

Saif-ur-rehman Khattak, Faculty of Pharmacy, Hamdard University, Shahra-e-Madinat Al-Hikmah, Muhammad Bin Qasim Avenue, Karachi-74600, Pakistan.

Central Drugs Laboratory, Director.

References

Sweetman SC. Martindale the Complete Drug Reference. 35th ed. London: Pharmaceutical Press; 2007. p. 1193-4.

Waterman KC, Adami RC, Hong J. Impurities in drugs products. In: Ahuja S, Alsante KM, editors. Handbook of Isolation and Characterization of Impurities in Pharmaceuticals. USA: Academic Press Elsevier; 2003. p. 75-6.

Qiu Z, Stowell JG, Cao W, Morris KR, Byrn SR, Carvajal MT. Effect of milling and compression on the solid-state Maillard reaction. J Pharm Sci 2005;94(11):2568-80.

Adrjanowicz K, Kaminski K, Grzybowska K, Hawelek L, Paluch M, Gruszka I, et al. Effect of cryogrinding on chemical stability of the sparingly water-soluble drug furosemide. Pharm Res 2011;28(12):3220‑36.

Desai D, Rao V, Guo H, Li D, Stein D, Hu FY, et al. An active film‑coating approach to enhance chemical stability of a potent drug molecule. Pharm Dev Technol 2012;17(2):227-35.

Li J, Wu Y. Lubricants in pharmaceutical solid dosage forms. Lubricants 2014;2:21-43.

ICH Harmonized Tripartite Guidelines for Impurities in Drug Substances, October 2006; Q3A R2.

ICH Harmonized Tripartite Guidelines for Impurities in Drug Products, June 2006; Q3B R2.

ICH Harmonized Tripartite Guidelines for Impurities: Residual Solvents, July 2007; Q3C R4.

ICH Specification: Test procedures and acceptance criteria for new drug substances and new drug products: Chemical substances, October 1999; Q6A.

United States Pharmacopeia 32. Rockville, MD: United States Pharmacopeial Convention; 2009. p. 2920-1.

European Pharmacopeia. 5th ed. Strasbourg Cedex, France: Council of Europe; 2005. p. 1933-4.

Badaway S, Vickery R, Shah K, Hussain M. Effect of processing and formulation variables on the stability of a salt of a weakly basic drug candidate. Pharm Dev Technol 2004;9(3):239-45.

Yam KL. Encyclopedia of Packaging Technology. 3rd ed. New York: John Wiley & Sons; 2009. p. 547-8.

Published

01-01-2015

How to Cite

Najam-us-Saquib, D. Sheikh, I. Ahmed, K. Usmanghani, and S.- ur- rehman Khattak. “EFFECT OF FORMULATION AND PROCESS VARIABLES ON DEGRADATION PRODUCTS OF LOVASTATIN IN TABLET DOSAGE FORM”. Asian Journal of Pharmaceutical and Clinical Research, vol. 8, no. 1, Jan. 2015, pp. 131-3, https://journals.innovareacademics.in/index.php/ajpcr/article/view/2704.

Issue

Section

Original Article(s)